Yamaha VMAX 2009 Service Manual page 111

Table of Contents

Advertisement

1. ABS test coupler
2. Fuel tank breather hose (fuel tank to rollover valve)
3. Fuel overflow hose
4. Fuel tank breather hose
5. Rollover valve
A. Install the hose onto the hose fitting of the rollover
valve, making sure that the hose contacts the
valve. Position the hose clamp 5 mm (0.20 in) from
the end of the hose, making sure to point the ends
of the clamp upward.
B. Do not allow the rear left turn signal light lead, rear
right turn signal light lead, tail/brake light lead, or
license plate light lead to hang down in this area.
C. Install the hose onto the hose fitting of the rollover
valve, making sure that the hose contacts the
valve. Position the hose clamp 5 mm (0.20 in) from
the end of the hose, making sure to point the ends
of the clamp outward.
D. Install the fuel overflow hose and fuel tank breather
hose, so that the end of each hose is positioned as
shown in the illustration.
2-58
CABLE ROUTING

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vmx17 2009Vmx17y 2009

Table of Contents