Morphy Richards Comfigrip Advanced 40715 Manual page 7

40715-40-41 inc AUS:9225 47507 MEE pump - Jon
Life long anti- scale
system
The life long anti-scale system
reduces scale deposits and helps
prolong the life of the iron.
MAINTENANCE
Jet cleaning
Your iron has a built in cleaning
system designed to keep the water
valve, steam chamber and steam
vents clear of lint and loose mineral
deposits. The 'jet clean' should be
operated after each period of
ironing.
To operate, ensure that there is little
water in the tank, place the iron on
its heel and turn the temperature
control dial to the maximum setting.
Wait for the beep, then unplug the
iron and hold it about 6'' (150mm)
above the sink in the ironing
position. Press the shot of steam
button about 10 times in
succession.
After this cleaning operation, empty
out any remaining water.
WARNING: Do not attempt to
descale the soleplate with
descaling products.
Self cleaning
(Certain models only)
Your iron has a built in cleaning
system designed to keep the water
valve, steam chamber and steam
vents clear of lint and loose mineral
deposits.
1 Half fill the iron with water.
2 Place the iron on it's heel.
3 Connect to a mains supply outlet.
All manuals and user guides at all-guides.com
4 Set the temperature control to
'MAX'. See 'Temperature control' on
page 5.
5 The indicator light will flash until the
required temperature is reached.
6 The indicator light remains 'on'
when the selected temperature is
attained.
(Certain models)
7 Disconnect the iron from the mains
supply outlet.
8 Hold the iron horizontally over a
sink.
9 Press and hold down the
Self-Cleaning button Â.
10 Steam and boiling hot water will
drain from the holes in the soleplate,
washing away the scale and
minerals that have built up inside
the Steam Chamber.
11 Gently move the iron back and forth
until the water tank is empty.
12 When cleaning is complete, release
the Self-Cleaning button Â.
13 Rest your steam iron back on it's
heel and allow to fully cool down.
14 Wipe the soleplate with a cold,
damp cloth.
After this cleaning operation, empty
G out any remaining water.
WARNING: Keep hands and
body away from the hot water.
To clean a stainless
steel soleplate
To keep the soleplate of your iron
clean and free of limescale, we
recommend that you use one of the
gentle chrome, silver or stainless
steel cleaners that are generally
available. Always follow the
manufacturers instructions. To clean
off melted man-made fibres set the
iron at 3 dot position and pass it
over a clean piece of cotton which
will draw the deposit off the surface.
7/3/08 15:28 Page 7
G G
H H
g
I I
7