Locking the Flash Exposure Setting (FE Lock)
You can lock the flash exposure so that the exposure settings are correctly
set for a particular portion of your subject.
To release the FE lock
Press the
button.
The FE lock may release if you press any button other than the
button.
Press the DISP. button to turn the
1
LCD monitor on.
Press the
2
to
.
Focus on the part of the subject on
3
which you wish to lock the flash
exposure setting.
Press and hold the shutter button
4
halfway until two beeps sound.
Without releasing your finger, press
the
button.
• The flash will fire a pre-flash and lock the
flash exposure to the required intensity to
illuminate the subject.
• The
icon will display.
Re-aim the camera to compose the
5
shot as desired and press the
shutter button fully.
button to set the flash
79