Replay Mode - Canon PowerShot SD100 User Manual

• The LCD monitor setting (On or Off) is saved by the camera when
the power is turned off so that the same setting is automatically
available when the power is turned on again. However, the setting
may be lost when the power has been turned off after the "Change
the battery pack" message has displayed, while the LCD monitor
was on in shooting mode.
• In the
setting.

Replay Mode (

When the mode switch is set to
mode, the LCD monitor turns on regardless of its On/Off
)
Press the DISP. button.
The display mode changes as follows with
each press.
Standard
Detailed
No Display
You cannot switch the display to Detailed in
index replay mode (p. 95).
, the LCD monitor will turn on.
35