Setting Menu - Canon PowerShot SD100 User Manual

Trimming Frame
• The trimming frame will appear on images that have already had one
assigned.
• Trimming settings can only be set for one image.
• Trimming settings are canceled with the following operations:
- When the MENU button is pressed.
- When the trimming settings are set for another image.
- When the print mode is closed (camera power shut off, mode
switch turned, or direct interface cable or connection cable
detached).
- When the zoom lever is pressed further toward
trimming frame at its maximum.
130
Trim the image.
2
Changing the Size of the Trimming Frame
• Press the zoom lever toward
• The trimming frame can be resized to
approximately half the image size at
minimum and practically as large as the
image at maximum.
• You can cancel the trimming setting by
sliding the zoom lever toward
when the trimming frame is already set to
the maximum size.
• When printing an image that has been
magnified using the trimming option, the
image quality may become coarser and
grainier depending on the magnifying rate.
With direct print compatible printers (CP
series), the trimming frame displays in
red.
Moving the Trimming Frame
Use the
trimming frame's position.
Rotating the Trimming Frame
Press the DISP. button to rotate the
trimming frame.
Press the SET button to close the
3

setting menu.

or
again
button to set the
with the
.