Locking The Flash Exposure Setting (Fe Lock) - Canon POWERSHOT SX110 IS User Manual

112
Locking the Flash Exposure Setting
(FE Lock)
You can lock the flash exposure so that the exposure settings are
correctly set regardless of the composition of your subject.
1
Raise the flash.
2
In mode, press the
(flash on).
3
Aim the camera at the subject on which you
wish to lock the exposure.
4
Press the shutter button halfway and press the
button.
• The flash will pre-fire and
5
Re-aim the camera to compose the shot as
desired and press the shutter button fully.
To Release the FE Lock:
Operate a button other than the control dial.
The FE lock cannot be used when [Flash Mode] in the [Flash
Settings] menu is set to [Manual].
Downloaded from ManualsCamera.com Manuals
Available Shooting Modes
button and select
will display.
p. 222