Reviewing An Image Right After Shooting - Canon PowerShot SD100 User Manual

Reviewing an Image Right after Shooting

Right after a shot is taken, the image appears in the LCD monitor for 2
seconds even if you release the shutter button regardless of whether the
LCD monitor is on or off.
You can also review it with the following procedures.
• By keeping the shutter button pressed after a shot.
• By pressing the SET button while the image is displayed on the LCD
monitor.
Press the shutter button halfway to stop displaying it so that you can shoot the
next frame.
You can do the following while the image is displayed.
- Check the image brightness in the histogram (p. 39).
- Erase the image (p. 113).
- Magnify the image in the display (p. 94).
Changing the Review Duration
The default review time is 2 seconds. The review function can be set to [Off] or
changed to any time in the range of 2 to 10 seconds in one-second increments.
60
In the (Rec.) menu, select
1
See Selecting Menus and Settings (p. 44).
Use the
2
setting and press the MENU button.
• With the [Off] option, the image will not
automatically display.
• In the [2 sec.] to [10 sec.] range, the
image will continue to display for the
specified time even if the shutter button is
released.
• Holding the shutter button down after a
shot holds the image in the display
regardless of the setting.
button to select review
.