Reviewing An Image Right After Shooting - Canon PowerShot S230 DIGITAL ELPH Connection Manual

44
Shooting

Reviewing an Image Right after Shooting

Right after a shot is taken, the image appears in the LCD monitor for 2
seconds even if you release the shutter button regardless of whether the LCD
monitor is on or off. You can also review it with the following procedures.
• By keeping the shutter button pressed after a shot.
• By pressing the
monitor. Press the shutter button halfway to stop displaying it.
• You can do the following while the image is displayed.
- Check the image brightness in the histogram (p. 32).
- Erase the image (p. 87).
- Zoom the image in the display (p. 75).
Changing the Review Duration
The default review time is 2 seconds.
The review function can be set to Off or changed to any time in the
range of 2 to 10 seconds in one-second increments.
In the
select
button while the image is displayed on the LCD
(Rec.) menu,
.
• See Selecting Menus and Settings (p. 37).
• Use the or
or a time from [2 sec.] to [10 sec.].
• With the Off option, the image will not
automatically display. However, if you
keep the shutter button fully pressed
after a shot, the image will display.
• In the [2 sec.] to [10 sec.] range, the
image will continue to display for the
specified time even if the shutter
button is released. You can display the
image for longer than the set duration
by keeping the shutter button pressed
all the way.
• Another picture can be taken even
while the last is displayed.
• The display will return to the Rec. screen.
button to select [Off],