Table of Contents
Advertisement
Application range
When using the generator, make sure the total load is within rated output of a genera-
tor. Otherwise, generator damage may occur.
AC
Power factor
EF3000iS
EF3000iSE
EF3000iSEB
NOTICE
9 Do not overload. The total load of all electrical appliances must not exceed
the supply range of the generator. Overloading will damage the generator.
9 When supplying precision equipment, electronic controllers, PCs, electronic
computers, microcomputer-based equipment or battery chargers, keep the
generator a sufficient distance away to prevent electrical interference from
the engine. Also ensure that electrical noise from the engine does not inter-
fere with any other electrical devices located near the generator.
9 If the generator is to supply medical equipment, advice should first be
obtained from the manufacturer, a medical professional or hospital.
9 Some electrical appliances or general-purpose electric motors have high
starting currents, and cannot therefore be used, even if they lie within the
supply ranges given in the above table. Consult the equipment manufacturer
for further advice.
1
–2,800 W
TIP
9 "–" means below.
9 Application wattage indicates when each device is
9 The simultaneous usage of AC and DC power is
9 The overload indicator light (red) comes on when
1
1
760-026
1 Overload indicator light (red)
0.8–0.95
(Efficiency 0.85)
–2,240 W
used by itself.
possible but total wattage should not exceed the
rated output.
EX:
Generator rated output
Frequency
AC
DC
total wattage exceeds the application range. (See
page 24 for more details.)
– 21 –
0.4–0.75
–950 W
Power factor
1.0
0.8
—
DC
Rated voltage
12 V
Rated current
12 A
2,800 VA
–2,650 W
–2,090 W
144 W
(12 V/12 A)
Advertisement
Table of Contents
