Samsung Galaxy Feel Instruction Manual page 25

Removing docomo nano UIM card
1
Insert the tip of the SIM ejector tool into the docomo nano
UIM card/microSD card tray eject hole horizontally (P.22)
The docomo nano UIM card/microSD card tray will slightly eject.
• Not inserting the tool in a straight line might result in damage or a
fault.
2
Pull out the docomo nano UIM card/microSD card tray in a
straight line
3
Remove the docomo nano UIM card/microSD card from the
docomo nano UIM card/microSD card tray
4
Insert the docomo nano UIM card/microSD card tray into
the terminal (P.22)
Information
• When handling docomo nano UIM card, take care not to touch or
scratch the IC.
• Attaching or removing forcibly may damage the docomo nano UIM card.
• Be careful not to lose the removed docomo nano UIM card.
• If you lost the SIM ejector tool, you can use a paper clip instead.
Example of a paper clip
23
Before using the terminal