Samsung Galaxy Feel Instruction Manual page 104

Item
Tap and pay Enable or disable the setting of the service available
by holding the terminal over the IC card reader, such
as Osaifu-Keitai service. → P.78
Using tethering
Tethering is generally a function which uses a mobile device such as smart
phone, etc. as modem to connect wireless LAN devices, USB compatible
devices and Bluetooth compatible devices to Internet.
• Up to 10 devices can be connected using Wi-Fi tethering at one time, 1
device can be connected using USB tethering, and up to 3 devices can
be connected using Bluetooth tethering. When you use Wi-Fi tethering,
USB tethering and Bluetooth tethering at one time, 14 devices in total
can be connected.
■ Setting Wi-Fi tethering
You can use your terminal as an Internet access point and connect at
most 10 wireless LAN devices to Internet.
1
From the Home screen,
"Tethering" → "Wi-Fi tethering"
2
• After the precautions are displayed, confirm them and tap "OK".
■ Setting access point for Wi-Fi tethering
1
From the Home screen,
"Tethering" → "Wi-Fi tethering"
2
• After the precautions are displayed, confirm them and tap "OK".
3
→ "Configure Wi-Fi tethering"
4
Tap "Network name" field → Input the network name
• "AndroidAP" is set in advance.
5
Tap "Security" field
• Select a proper setting from "Open" and "WPA2 PSK".
6
Tap "Password" field → Enter password
• Password is not required if you set "Open" in "Security".
Description
→ "Settings" → "Connections" →
→ "Settings" → "Connections" →
7
"SAVE"
Information
• "WPA2 PSK" is set by default.
• While connected via Wi-Fi tethering, on the Wi-Fi tethering screen,
→ "Configure Wi-Fi tethering" → Mark "Hide my device" → Tap "SAVE"
to disconnect the connected wireless LAN device temporarily, but it
connects again automatically.
• If "Hide my device" is marked, the terminal cannot be scanned. When
you connect from the other device, confirm the information displayed
in "HOW TO CONNECT FROM OTHER DEVICES" on the Wi-Fi tethering
screen, and then set the Wi-Fi access point manually.
• When connected via Wi-Fi tethering, on the Wi-Fi tethering screen,
tap → "WPS push button" to connect by pressing WPS button
on connected device. Also, on the Wi-Fi tethering screen, tap
"Timeout settings" to turn off Wi-Fi tethering automatically when
there is no connected device for specified time.
■ Setting Bluetooth Tethering
You can connect up to 3 Bluetooth devices to the Internet at one time,
using the terminal as an Internet access point.
1
From the Home screen,
"Tethering" → "Bluetooth tethering" →
Information
• To use Bluetooth tethering, this terminal needs to be detectable.
For details, refer to "Enabling Bluetooth function and making your
terminal detectable" (P.124).
102
→ "Settings" → "Connections" →
Settings
→