ViewSonic N2652w-1M Service Manual page 8

Power Consumption: Normal
Interference with RF and Video
Electromagnetic Compatibility
Power Supply Transient Immunity
(Supply Transients and Outage)
Surge Immunity Test
Power Supply Missing Cycle Immunity
Power Supply Acoustics
Efficiency
Leakage Current
Power Saving(DPMS)
Recovery Time
Power Factor Correction
5. Firmware & OSD
The product firmware of VS11620-1M / VS11335-1M shall have a firmware version of
Any changes/revisions afterward shall also be pre-approved by ViewSonic in written. For
VS11620-1M / VS11335-1M, its firmware shall have a built-in frequency table for NTSC/ATSC
off-air TV/CATV, Closed-Caption, and with MTS implementation.
All audio/video and other output adjustments shall be performed by using an On Screen Display
(OSD) via a Remote Control Unit (RCU) adjustments.The following tables list the OSD functions
supported by VS11620-1M / VS11335-1M.
OSD Table for VS11620-1M / VS11335-1M
OSD
Brightness
Contrast
Sharpness
Color
Tint
Color Temperature
Back Light
Aspect ratio
Language
OSD Timeout
Memory recall
Treble
Bass
Balance
Audio out
Surround
Auto Scan
Tuner Mode
Channel Edit
ViewSonic Corporation
(including blown fuse)
Normal: 105 W // Stand by: < 3 W
There shall be no visible interference between power
supply, RF and video signals. This applies to all available
RF channels and video modes.
This product shall adhere to the compatibility and
immunity specifications in FCC.
Able to withstand an ANSI / IEEE C62.41 – 1980 2000V
ring wave with no damage.
Able to withstand 1.25X nominal Line Voltage for one
cycle with no damage.
Function properly without reset or visible screen artifact
when 1/3 cycle of AC Power is randomly missing.
Power supply shall not produce any audible noise during
startup and normal operation. Audible shall define to be
in compliance with ISO 7779 (DIN EN27779: 1991) .
Power Switch noise shall be Excluded.
>= 80% @ full load, nominal line
<0.5mA @ 240VAC
N/A
< 3 sec.
Compliant with EN61000-3-2
Adjust the Black levels
Adjust the White levels
Adjust the Sharpness levels
Adjust the Color levels
Adjust the Tint levels
Selections on Normal, Warm, user, Cold
Adjust the Back Light levels
Selections the Image Size on Full, Wide1, Wide2, Wide3, 4:3, 16:9, No
scale, Normal
Selections English, Spanish , French
By area have some difference
Set OSD disappearing time
Set user settings to factory preset value
Adjust the Hi Frequency levels
Adjust the Low Frequency levels
Adjust the Spk output levels
Audio signal output On or Off
Surround sound effect On or Off
TV program Auto Search
Selections TV sources to Air or Cable
TV channel name edit
5
Confidential - Do Not Copy
V:P01.
N2652w-1M