ViewSonic N2652w-1M Service Manual page 24

PIP/POP
PIP/POP button allows you to watch two screens from different sources at the same time.
(PIP is picture in picture; POP is picture out of picture)
Press PIP/POP on the remote control repeatedly.
The screen will change from normal screen → PIP screen → POP screen.
PIP Screen
•
PIP Input Source Select
1. Press P.INPUT button to select input source for sub-screen as following.
Main Screen
TV
DTV
HDMI
YPbPr
AV
S-Video
VGA
2. Use ◄► to select the sub-input source and press ENTER to confirm.
Note: To select the input source for main screen, press INPUT button.
•
SWAP: Press SWAP to exchange main screen to sub-screen, including video and sound.
The function is available both in PIP and POP.
ViewSonic Corporation
POP Screen
Available Sub-Screen Input Source
DTV / HDMI / YPbPr / VGA
TV / YPbPr / AV / S-Video / VGA
TV / YPbPr / AV / S-Video / VGA
TV / DTV / HDMI / AV / S-Video
DTV / HDMI / YPbPr / VGA
DTV / HDMI / YPbPr / VGA
TV / DTV / HDMI / AV / S-Video
21
Confidential - Do Not Copy
N2652w-1M