Switching Between Metering Modes - Canon PowerShot SD400 Digital Elph User Manual

To Release the FE Lock
Press the
The FE lock may be released by pressing the zoom lever, MENU
button or
photo effect or the shooting mode, or by turning the LCD monitor off.

Switching between Metering Modes

You can switch between metering modes to shoot.
Evaluative
Center
Weighted
Average
94
button.
button, or by changing the white balance, ISO speed,
Shooting Mode
Appropriate for standard shooting conditions,
including backlit scenes. The camera divides images
into several zones for light metering. It evaluates
complex lighting conditions, such as the position of
the subject, the brightness, the direct light, and the
backlighting, and adjusts the settings to the correct
exposure for the main subject.
Averages the light metered from the entire frame, but
gives greater weight to the subject matter at the center.
Meters the area within the spot AE point at the center
of the LCD monitor. Use this setting when you want
Spot
to set the exposure on the subject in the center of
the monitor.
Press the
1
between metering modes.
The selected metering mode appears on the
LCD monitor.
button to switch