Canon PowerShot SD400 Digital Elph User Manual page 150

• Please see How to Open the Terminal Cover (p. 13).
• With the
cable until it clicks into place.
• Treat the connector area with great care while you attach and remove
the interface cable.
• Always grasp the connector's sides to remove the interface cable
from the camera's DIGITAL terminal.
Slide the mode switch to
3
Press the power button until the power lamp lights green.
4
Select [Canon CameraWindow] in the event dialog that
5
appears on the computer and click [OK] (first time only).
If the event dialog fails to appear, click the [Start] menu, and select
[Programs] or [All Programs], followed by [Canon Utilities],
[CameraWindow], and [CameraWindow].
148
facing in the direction shown, insert the interface
USB Port
Interface Cable
DIGITAL Terminal
(Playback).