Canon PowerShot SD400 Digital Elph User Manual page 165

RAW
Unidentified Image
Cannot magnify!
Cannot rotate
Incompatible WAVE format. A sound memo cannot be added to this image
Cannot register this image! You attempted to add a start-up image or a movie
Protected!
Too many marks.
Cannot complete!
Unselectable image.
Exx
You attempted to play back a RAW image.
You attempted to play back an image that was
recorded in a special data type (proprietary data
type used by the camera of another
manufacturer, etc.) or a movie clip recorded by
another camera.
You attempted to magnify an image recorded in a
different camera or data type, an image edited
with a computer, or a movie.
You attempted to rotate an image recorded in a
different camera or data type, an image edited
with a computer, or a movie.
since the data type of the existing sound memo is
incorrect.
that was created with another camera.
You attempted to erase a protected image or
movie.
Too many images have been marked with print
settings or transfer settings. Cannot process any
more.
Could not save the print or transfer settings.
You attempted to set the print settings for a non-
JPEG image.
(xx: number) Camera malfunction. Turn the
power off and then back on, then shoot or play
back. A problem exists if the error code
reappears. Note the number and contact your
Canon Customer Support Help Desk. If an error
code displays directly after taking a picture, the
shot may not have been recorded. Check image
in playback mode.
163