Overview Of Available Cameras; Connecting A Console; Connecting A Monitor; Connecting A Camera - Omron F160 Setup Manual

Overview of Available Cameras

2-4-1

Connecting a Console

Connect the Console to the F160's CONSOLE connector. An F160-KP or
F150-KP Console can be connected.
CONSOLE
2-4-2

Connecting a Monitor

Connect the monitor cable to the F160's MONITOR connector, and attach the
enclosed Ferrite Core to the monitor cable. The Ferrite Core should be
attached to the cable approximately 10 mm from the MONITOR connector.
MONITOR
2-4-3

Connecting a Camera

Connect the camera cable to the F160's CAMERA connector.
CAMERA
Note The connector is capped when the F160 is shipped. When not using the con-
nector, leave the cap in place to protect against dust, dirt, and static electricity.
2-5

Overview of Available Cameras

The F160 Camera with Light is a special F160 Camera that has a special lens
and light source already attached. The light source and lens are contained in a
single unit, so installation is very simple. Just mount the Camera at the proper
distance from the measurement object and it is ready to use.
16
All manuals and user guides at all-guides.com
Ferrite Core
Approx. 10 mm
SHIFT
ENT
ESC TRIG
Wrap the cable in one loop
in the Ferrite Core.
Section 2-5