Description And Location Of Parts - Sony STR-DA5600ES Operating Instructions Manual

Description and location of parts

Front panel
A ?/1 (on/standby)
Press to turn the receiver on or off. When
the power is on, the lamp above the button
lights up in green.
Saving the power in standby mode.
When "Control for HDMI" (page 129),
"Server Function" (page 132), "Network
Standby" (page 133), and "RS232C
Control" (page 134) are set to "OFF," and
the power for zone 2/zone 3 is turned off.
If "Control for HDMI," "Server
Function," or "Network Standby" is set to
"ON," "A.STNDBY" appears in the
display window of the receiver while the
receiver is in standby mode. The top of
the receiver may become hot. This
condition occurs because current is
8
GB
To remove the cover
Press PUSH.
When you remove the cover, keep it out
of reach from children.
flowing in the internal circuits of the
receiver. This is not a malfunction.
B TONE MODE, TONE
Adjusts FRONT, CENTER,
SURROUND/SURROUND BACK,
FRONT HIGH BASS and TREBLE.
Press TONE MODE repeatedly to select
BASS or TREBLE, then turn TONE to
adjust the level.
C MEMORY/ENTER, TUNING MODE,
TUNING
Press to operate a tuner (FM/AM) and
satellite radio (SIRIUS) (USA/Canadian
model only).
D Remote sensor
Receives signals from remote
commander.
To open the cover
Slide the cover to the
left.