Selecting The Front Speakers - Sony STR-DA5600ES Operating Instructions Manual

Setting the surround back
speakers
You can switch the usage of the speaker(s)
connected to the SURROUND BACK/
ZONE 2 terminals in accordance with the
intended use. Be sure to set "Sur Back Assign"
before you perform auto calibration.
1
Press MENU.
The menu is displayed on the TV screen.
2
Press V/v repeatedly to select
" Settings," then press
b.
The Settings menu list appears on the TV
screen.
3
Press V/v repeatedly to select
"Speaker," then press
4
Press V/v repeatedly to select
"Sur Back Assign," then press
.
5
Press V/v repeatedly to select
the parameter you want, then
press .
Parameter
OFF
BI-AMP
ZONE2
6
Press RETURN/EXIT O.
Note
This setting is available if the speaker pattern is set
so that there are no surround back speakers and no
front high speakers.
46
GB
or b.
Explanation
The SURROUND BACK/
ZONE 2 terminals can be
used for a surround back
speakers connection.
The SURROUND BACK/
ZONE 2 terminals can also
be used for a bi-amplifier
connection (page 112).
The SURROUND BACK/
ZONE 2 terminals can also
be used for a zone 2
connection (page 94).

Selecting the front speakers

You can select the front speakers you want to
drive.
SPEAKERS (A/B/A+B/OFF)
Press SPEAKERS (A/B/A+B/OFF)
or
repeatedly to select the front
speaker system you want to drive.
You can confirm which set of terminals (A or
B) are selected by checking the indicators in
the display window.
Indicators Selected speakers
Notes
• If the speaker pattern is set so that there are front
high speakers, you cannot select the FRONT B/
FRONT HIGH terminals.
• This setting is not available when headphones are
connected.
The speakers connected to the
FRONT A terminals.
The speakers connected to the
FRONT B/FRONT HIGH
terminals.
The speakers connected to both the
FRONT A and FRONT B/FRONT
HIGH terminals (parallel
connection).
"SPEAKERS OFF" appears in the
display window.
No audio signals are output from any
speaker terminals, or the PRE OUT
jacks.