Sony STR-DA5600ES Operating Instructions Manual page 77

Notes
• The sound fields for music do not work in the
following cases.
– The multi-channel input is selected.
– Dolby TrueHD signals with a sampling
frequency of 176.4 kHz and higher are being
received.
• The sound fields for music other than "PLII
Music," "PLIIx Music," "PLIIz Height," and
"Neo:6 Music" also do not work when DTS-HD
signals with a sampling frequency of 88.2 kHz and
higher are being received.
• "PLII Music," "PLIIx Music," "PLIIz Height," and
"Neo:6 Music" also do not work when the speaker
pattern is set to 2/0 or 2/0.1.
• If you select "PLII Music," "PLIIx Music," "PLIIz
Height," or "Neo:6 Music" while the receiver is
receiving signals with a sampling frequency of
176.4 kHz and higher, the signals will always be
played back at either 44.1 kHz or 48 kHz.
• If you select a sound field other than "PLII Music,"
"PLIIx Music," "PLIIz Height," or "Neo:6 Music"
while the receiver is receiving signals with a
sampling frequency of 88.2 kHz and higher, the
signals will always be played back at either
44.1 kHz or 48 kHz.
• "PLIIx Music," and "PLIIz Height" do not appear
depending on the speaker pattern you select.
– "PLIIx Music" is available only when the
speaker pattern is set so that there are surround
back speaker(s).
– "PLIIz Height" is available only when the
speaker pattern is set so that there are front high
speakers.
• Some speakers may not output sound, depending
on the sound field setting.
• When one of the sound fields for music is selected,
no sound is output from the subwoofer if all the
speakers are set to "LARGE" in the Speaker
settings menu. However, the sound will be output
from the subwoofer if the digital input signal
contains L.F.E. signals, or if the front or surround
speakers are set to "SMALL," the sound field for
movie is selected, or "Portable Audio" is selected.
• If there is any noise present, the noise may be
different depending on the sound field you select.
• Even if you set the speaker pattern so that there are
both surround back speakers and front high
speakers, sound cannot be output from each pair of
speakers simultaneously.
When you select "PLIIz Height," or the digital
input signal contains signals for the front high
channels, sound is output from the front high
speakers. In other cases, sound is output from the
surround back speakers.
If you always want to output sound from the front
high speakers, set the speaker pattern so that there
are no surround back speakers (page 45).
77 GB