System Settings; Settings Lock; Rs232C Control; Software Version - Sony STR-DA5600ES Operating Instructions Manual

System settings

Customizes the settings of the receiver.

RS232C Control

Let you turn the control mode for maintenance
and service on or off.
x OFF
x ON
Language
Selects the language for the messages on the
screen.
x English
x Español
x Français
x Deutsch
Auto Standby
Lets you turn the function that switches the
main zone to standby mode automatically
when you do not operate the receiver or when
there is no signal input to the receiver on or off.
x OFF
Does not switch to standby mode.
x ON
Switches to standby mode after approximately
30 minutes.
Note
This function does not work when "Server,"
"Rhapsody," "SHOUTcast," "FM," "AM,"
"SIRIUS," or the multi-channel input is selected.
134
GB

Settings Lock

Lets you lock the settings of the receiver.
x ON
You can only turn this function on using the
setting menu. When you turn this function off,
perform the following procedure.
?/1
1
Press ?/1 to turn off the
receiver.
2
While holding down MUSIC and
HDMI IN, press ?/1 to turn on
the receiver.

Software Version

You can check the version of the software on
the system of the receiver, and you can also
update the software of the receiver.
You can also update the software of the
receiver using the Setup Manager application
software provided on the CD-ROM supplied
with the receiver. For details, see "Updating
the receiver software using the Setup
Manager" (page 93).
To update the receiver using the
menu
1
Select "Software Version," then press
.
The current software version is displayed
on the TV screen.
2
Select "Update via Internet," then press
.
MUSIC
HDMI IN