Nokia RM-59 User Manual page 72

S e t t i n g s
Activate a voice command
After you have associated a voice tag with a function in your device, to issue a
command, speak the voice tag.
1. In the standby mode, press and hold the right selection key or voice key.
2. With Speak now displayed, pronounce the voice tag clearly into the
microphone.
With the voice tag found, the device displays Found:, and plays the recognized
voice tag through the earpiece. The function you requested is activated.
Options
After you have associated a voice tag to a command, you can select one of the
following options:
Playback—Listen to the voice command tag.
Change—Change the voice command.
Delete—Erase the voice command tag.
Enhancement settings
The enhancement settings menu is shown only if the device has been connected
to a compatible enhancement. In the standby mode, select
Enhance-ments > Headset, Handsfree, or Charger.
Headset
Important: The headset may affect your ability to hear sounds around
you. Do not use the headset in situations that may endanger your
safety.
Select the option of your choice to enter the submenu and modify its
settings.
Default profile—Choose the profile you want automatically activated with a
headset connected.
Automatic answer > On or Off—Answer calls automatically after one ring with a
headset connected.
Hands-free operation
Select the option of your choice to enter the submenu and modify its settings.
74
Menu
FCC DRAFT
> Settings >