Nokia RM-59 User Manual page 38

M e s s a g e s
For example, if you pause for 5 seconds after connecting to voice mail, enter p
twice (two times 2.5 seconds) after the voice mailbox number:
2145551212pp.
5. Enter any remaining pauses or other information that enables you to listen to
your messages, and select OK.
6. Enter a name (such as voice mail), and select OK.
To dial and listen to your voice mail, press and hold the assigned 1-touch dialing
key in the standby mode.
Insert dialing codes
Press * repeatedly to cycle through dialing codes. When the desired code appears
in the display, pause briefly and the code is inserted into the dialing string.
The following dialing codes are available:
*—Bypasses a set of instructions.
p—Pauses for 2.5 seconds before sending any numbers that follow.
+—Replaced by the international access code.
w—Waits for you to press the call key before sending the numbers or codes that
follow.
Clear voice mail icon
To clear the voice mail icon from the display, in the standby mode, select
Messages > Voice messages > Clear voice message
Web messaging
Web messaging is a network service. See "Network services," p. 7.
If your network operator supports this feature, you can use the minibrowser to
check for e-mail messages. In the standby mode, select
Minibrowser messages > Connect.
40
icon.
Menu >
FCC DRAFT
Menu >
Messages >