Table of Contents
Advertisement
receiving the information. This feature may not function in all areas or at all
times.
In the standby mode, select
Menu
Emergency
or
On
>
Yes
or No.
Emergency—This is the default profile. The device location information is shared
only during an emergency call to the official emergency number programmed
into your device. The screen displays
standby mode.
On—The device location information is shared with the network whenever the
device is powered on and activated. The screen displays
hand corner in the standby mode.
Location information will always be shared with the network during emergency
calls to the official emergency number programmed into the device, regardless of
which setting is selected. After placing an emergency call the device remains in
emergency mode for 5 minutes. During this time, the location information will be
shared with the network. See "Emergency calls," p. 107.
Anykey answer
Anykey answer enables you to answer an incoming call. Briefly press any key
except the right selection or end key. In the standby mode, select
Settings
>
Call
>
Anykey answer
Preferred carrier
Preferred carrier chooses a preferred long distance carrier. In the standby mode,
select
Menu
>
Settings
>
Call
>
With this feature enabled, you must enter the 2-digit carrier code.
Automatic redial
Occasionally, your network may experience heavy traffic, resulting in a fast busy
signal when you dial. With automatic redial activated, your device redials the
number (number of times is specified by the network), and notifies you when the
network is available. In the standby mode, select
Automatic redial
>
On
or Off.
FCC DRAFT
> Settings>
Call
>
Location info sharing
in the upper left hand corner in the
in the upper left
>
On
or Off.
Preferred carrier
>
On
or Off.
Menu
>
Settings
S e t t i n g s
>
Menu
>
>
Call
>
67
Advertisement
Table of Contents
