Table of Contents
Advertisement
32
CONTROLS AND SETTINGS
Dryer controls and settings
This manual covers many models and not all cycles, options, or features listed are available
on every model. Consoles shown above for reference only. Your model may differ.
Dry cycle selection
NOTE
The Clean Lint Filter LED will illuminate after
each drying cycle as a reminder to clean
the lint filter. The lint filter must be cleaned
after every load. This is NOT a warning of a
clogged exhaust duct or filter. Open door or
press CANCEL to turn off the LED.
For best results
Follow the fabric care label
instructions on items to be washed.
Turn the DRYER cycle selector in either
direction to select a drying cycle.
NOTE
To change settings after the cycle starts,
press the START|PAUSE button and adjust
the setting. Press the START|PAUSE
button again to resume the cycle.
Auto dry cycles
Auto Dry cycles take the guesswork out
of selecting the correct drying time for
each load. With auto dry cycles, the load
will automatically be dried at the selected
temperature. When the load has neared
the end of the drying cycle, it will continue
to tumble for a brief cool down period.
This helps reduce wrinkling and makes
items easier to handle during unloading.
Drying time varies depending on size of
load, dampness of load, and fabric type.
Available auto dry settings are as follows:
Normal
Select this cycle to dry everyday fabrics
including cottons, linens, and sheets.
Bulky
Select this cycle for bulky items such
as comforters, blankets, mattress pads,
sleeping bags, and other similar items.
Delicates
Select this cycle to dry cottons, blends, and
permanent press items with a no-iron finish.
Activewear
Select this specialty cycle to dry lightweight
synthetic athletic apparel including stretch
fabrics.
Hide quick links:
Advertisement
Table of Contents
