Installing An Additional Serial Port - Fujitsu DESKPOWER N300 Series User Manual

I Installing an Additional Serial Port
There are two ways of installing an additional serial port:
1. An additional serial interface can be installed in a rear slot cover plate like a board. The condition
is that the mainboard has a free internal serial port.
Install the rear slot cover plate with the serial port like a board (see "Installing and removing a
board").
Connect the cable of the additional serial port to the connector on the mainboard.
2. An installation opening for the serial port is provided on the rear panel of the casing. As a result, no
board slot is occupied when a second serial port is installed.
Insert a screwdriver into the opening and break out the pre-stamped installation opening by moving
it backwards and forwards.
Fasten the serial port with the screws.
Connect the cable of the additional serial port to the connector on the mainboard.
34