Table of Contents
Advertisement
Low-Profile boards
For units with a particularly low overall height, there are so-called low-profile boards with a slot cover
with a lower overall height to match the low-profile units. To also install these low-profile boards in
normal board slots, you must mount a corresponding slot adapter beforehand.
Mounting slot adapter
Fit the slot adapter on the slot cover of the low-profile board (1) and screw it on (2).
Now you can install the low-profile board in a suitable slot like a normal board (see the chapter
"Installing board").
Removing slot adapter
Unscrew the screw (1) and remove the slot adapter (2).
Installing an Additional Serial Port
An additional serial interface can be installed in a rear slot cover plate like a board. The condition is
that the system board has a free internal serial port.
Connect the cable of the additional serial port to the connector on the system board.
34
2
1
Advertisement
Table of Contents
