Installing A Board - Fujitsu DESKPOWER N300 Series User Manual

I Installing a board
Open the casing (see "Opening the casing" chapter).
2
1
3
Press on the Flexy slot lever in the direction of the arrow (1), unhook it and swing it up in the direction
of the arrow (2).
Remove the cover plate from the slot (3).
Do not dispose of the cover plate. For cooling, protection against fire and in order to comply
with EMC regulations, you must refit the cover plate if you remove the board.
Make the required settings for the board.
Push the board up to its slot (4) as far as the stop.
Press the board into the slot so that it engages.
Close the Flexy slot lever (5) and press on it in the direction of the arrow (6) until it engages.
5
6
4
31