Using The Sleep Timer - Sony BDV-Z7 Operating Instructions Manual

By pressing You can
PROG +/–, Select the TV channel.
c/C
After pressing /, you can select
the next (c) or previous (C) text
page.
Turn off the TV sound
temporarily.
Number buttons, Select the TV channel.
-
After pressing /, you can select
the text page by entering the three
digit page number.
HOME Display the menu of the TV.
ANALOG Switch to analogue mode.
DIGITAL Switch to digital mode.
/ Display the information.
/ Access text.
Display the Digital Electronic
Programme Guide (EPG).
TOOLS Display the operation menu for the
current display.
RETURN Return to the previous channel or
layer on the menu of the TV.
Change the aspect ratio of the
connected TV.
C/X/x/c,
Select the item on the menu.
Tip
• The function of these buttons are same as the remote
buttons of the SONY TV. For details, refer to the
operating instructions of the TV.

Using the Sleep Timer

You can set the system to turn off at a preset
time, so you can fall asleep listening to music.
You can preset the time in 10-minute
increments.
Press SLEEP.
Each time you press SLEEP, the minutes display
(the remaining time) changes by 10-minutes.
When you set the sleep timer, "SLEEP" flashes
in the front panel display.
To check the remaining time
Press SLEEP once.
To change the remaining time
Press SLEEP repeatedly to select the desired
time.
To set the sleep timer using the
system menu
1
Press SYSTEM MENU.
2
Press X/x repeatedly until "SLEEP
MENU" appears in the front panel
display, then press
3
Press X/x to select a setting.
The minutes display (the remaining time)
changes by 10 minutes.
Tip
• You can select the remaining time by pressing
the number buttons. In this case, you can preset
the time in 1-minute increments.
4
Press .
The setting is made and "SLEEP" flashes in
the front panel display.
5
Press SYSTEM MENU.
The system menu turns off.
or c.
63
GB