Using The Sleep Timer; Changing The Brightness Of The Front Panel Display - Sony DAV-DZ390K Operating Instructions Manual

Using the Sleep Timer

You can set the system to turn off at a preset
time, so you can fall asleep listening to music.
You can preset the time in 1 or 10-minute
increments.
Press SLEEP.
Each time you press SLEEP, the minutes display
(the remaining time) changes by 10 minutes.
When you set the sleep timer, "SLEEP" flashes
in the front panel display.
To check the remaining time
Press SLEEP once.
To change the remaining time
Press SLEEP repeatedly to select the desired
time.
To cancel the sleep timer
function
Press SLEEP repeatedly until "SLEEP OFF"
appears in the front panel display.
To set the sleep timer using the
system menu
1
Press SYSTEM MENU.
2
Press X/x repeatedly until "SLEEP"
appears in the front panel display, then
press or c.
3
Press X/x to select a setting.
The minutes display (the remaining time)
changes by 10 minutes.
Tip
• You can select the remaining time by pressing
the number buttons. In this case, you can preset
the time in 1-minute increments.
4
Press .
The setting is made and "SLEEP" flashes in
the front panel display.
5
Press SYSTEM MENU.
The system menu turns off.
Changing the Brightness
of the Front Panel
Display
You can set the brightness of the front panel
display to either of 2 levels.
1
Press SYSTEM MENU.
2
Press X/x repeatedly until "DIMMER"
appears in the front panel display, then
press or c.
3
Press X/x to select the brightness of
the front panel display.
• "DIMMER OFF": The front panel display
is bright.
• "DIMMER ON": The front panel display
is dark.
4
Press .
The setting is made.
5
Press SYSTEM MENU.
The system menu turns off.
85
GB