Sony BDV-Z7 Operating Instructions Manual page 16

1
Before installing the speakers on a wall, check that the adjustable support is returned to
its original position on the bottom of the speakers.
2
Connect the speaker cord to the speaker.
Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord
with the color tube to 3, and the speaker cord without the color tube to #.
3
Prepare screws (not supplied) that are suitable for the hole on the rear of each speaker.
See the illustrations below.
Hole on the rear of the speaker
5 mm
10 mm
4
Fasten the screws to the wall.
5 to 7 mm
5
Hang the speakers on the screws.
Rear of the speaker
16
GB
Color tube
Front left speaker (L): White
Front right speaker (R): Red
Adjustable support