Samsung DW80M2020US Service Manual page 4

Check if the power cable is damaged, flattened, cut or otherwise degraded.
ࣃ
➢ If faulty, replace it immediately.
Failure to do so may result in electric shock or fire.
Completely remove any dust or foreign material from the housing, wiring and connection
ࣃ
parts.
➢ This will prevent a risk of fire due to arcing and short circuits in advance.
When connecting wires, make sure to connect them using the correct connectors and
ࣃ
check that they are completely connected.
➢ If tape is used instead of the connectors, it may cause fire due to arcing.
Make sure to disconnect the PBA power terminals before starting the service.
ࣃ
➢ Failing to do so may result in a high voltage electric shock.
When replacing the heater, make sure to fasten the nut after ensuring that it is inserted
ࣃ
into the bracket-heater.
➢ If the nut is not fastened correctly, it can cause a water leak.
Check for any water leakage.
ࣃ
➢ Perform a test using the standard(normal) cycle and check whether there is any
water leakage through the floor section or the pipes.
Do not allow consumers to repair or service any part of the dishwasher themselves.
ࣃ
➢ This may result in personal injury and shorten the product life.
If it seems that grounding is needed due to water or moisture, make sure to run
ࣃ
grounding wires.
➢ Failure to do so may result in electric shock due to electric leakage.
2 _ Safety Instructions
While Servicing
After Servicing