Part
Drain Hose
※ Reassembly is in the reverse order of the removal.
20 _ Disassembly and Reassembly
Figure
Description
Preparation:
●
Disassemble the Base Cover.
- Refer to the Base Cover disassembly section
to separate.
1. Remove the Sound-proof Felt.
2. Pull out the two Hooks(Make sure to wear
gloves when removing it. Be careful as
the steel plate is sharp and may cut you).
3. Remove the clamp by rotating.Use a vice plier.
(Be careful when removing the clamp as
the connection is easily damaged.)
4. Release the hose from Assy Sump carefully
and remove it entirely.