Part
Motor
※ Reassembly is in the reverse order of the removal.
Figure
1. Disconnect the five(5) connectors from the Motor.
Description
Disassemble the cover base.
- Refer the "Cover base" disassembly section.
2.
L oosen the clamps(left side in picture) and release
the hose from the sump.
3.
H old and pull out the circulation motor carefully to
remove it from the sump.
C aution
Make sure to remove remain water in the
dishwasher. If not, water will spill on to the foor.
4. Grab the base and pull out the motor.
Disassembly and Reassembly _ 25