Table of Contents
Advertisement
SX110
Specifications
TYPE
Slimline, direct radiating subwoofer
FREQUENCY RESPONSE (1)
50Hz-150Hz ± 3dB, -10dB @ 42Hz
DRIVER
1 x 10" (250mm)/2" (50mm) voice coil, long excursion, ferrite magnet
RATED POWER (2)
250W AES, 1000W peak
RECOMMENDED AMPLIFIER
VIA2502
SENSITIVITY (10)
97dB
MAXIMUM SPL (9)
121dB continuous, 127dB peak (half space)
NOMINAL IMPEDANCE
8 ohms
DISPERSION (-6dB)
Omnidirectional
CROSSOVER
80-120Hz active
ENCLOSURE
Plywood
FINISH
Black or white
PROTECTIVE GRILLE
Perforated steel
CONNECTORS
2 x NL4
PIN CONNECTIONS (INPUT)
+1, -1 (+2, -2 link through)
PIN CONNECTIONS (LINK)
+1, -1 (+2, -2 link through)
FITTINGS
12 x M8 inserts
DIMENSIONS (INCL FEET)
(W) 417mm x (H) 297mm x (D) 415mm
(W) 16.4ins x (H) 11.7ins x (D) 16.3ins
WEIGHT
12kg (26.5lbs)
Technical Drawing
Copyright © 2020 Martin Audio Ltd.
Notes
(1) Measured on-axis in half (2pi) space at 2 metres, then referred to 1
metre.
(2) AES Standard ANSI S4.26-1984.
(3) Measured in half (2pi) space at 2 metres with 1 watt input, using band
limited pink noise, then referred to 1 metre.
(4) Measured in half (2pi) space at 2 metres using band limited pink noise,
then referred to 1 metre.
(5) Measured on-axis in open (4pi) space at 2 metres, then referred to 1
metre.
(6) Measured in open (4pi) space at 2 metres with 1 watt input, using band
limited pink noise, then referred to 1 metre.
(7) Measured in open (4pi) space at 2 metres using band limited pink noise,
then referred to 1 metre.
(8) Measured in open (4pi) space at 2 metres with 2.83V input, using band
limited pink noise, then referred to 1 metre.
(9) Calculated at 1 metre.
(10) Measured in half (2pi) space at 2 metres with 2.83V input, using band
limited pink noise, then referred to 1 metre.
10
SX SERIES USER GUIDE
SX SERIES USER GUIDE V2.2
Advertisement
Table of Contents
