Transit Covers - Martin Audio SX Series User Manual

SX SERIES USER GUIDE
SX218

Transit Covers

The SX218 features an optional transit cover to protect the cabinet when used in portable applications.
To ensure that the insert is accurately located, four locating brackets are utilised. These are built into the cabinet in the four corners and
maybe fitted in the parked position as standard. To use with the transit cover it is necessary to reverse the four brackets.
Remove the top and bottom safety screws from the grille. Insert a flat blade screwdriver into the slots of the grille and carefully easing the
grille out of the slot.
Remove the screws from the grille support on the side of the cabinet and remove the grille support.
Remove the three screws from the bracket.
59
Copyright © 2020 Martin Audio Ltd. SX SERIES USER GUIDE V2.2