Psx Specifications - Martin Audio PSX User Manual

PSX
USER GUIDE

PSX SPECIFICATIONS

ACOUSTICAL
TYPE
FREQUENCY RESPONSE (see note 1)
MAXIMUM SPL (see note 3)
DRIVER
RATED POWER (see note 2)
DISPERSION
AUDIO INPUT
CONNECTORS
ANALOGUE INPUT IMPEDANCE
MAXIMUM ANALOGUE INPUT LEVEL
AES/EBU IMPEDANCE
INTERNAL PROCESSING
NETWORK
CONNECTORS
PROTOCOL
AMPLIFIER MODULE
TYPE
PEAK OUTPUT POWER
CONNECTOR
AVERAGE EFFICIENCY
COOLING
MAXIMUM AMBIENT TEMPERATURE
Notes
(1) Measured on-axis in ground plane (2π space) at 2 metres, then referred to 1 metre.
(2) AES Standard ANSI S4.26-1984.
(3) Measured in half-space at 1 metre.
PSX User Guide V1.0
Compact, self-powered 15" reflex-loaded subwoofer
48 Hz - 150 Hz ± 3 dB
133 dB continuous, 136 dB peak
1 x15"/380 mm (4"/100 mm voice coil), ultra-long excursion,
high efficiency ferrite magnet
800 W AES, 3200 W peak
Omnidirectional
Female XLR input, male XLR link output
20 kohms balanced to ground
6.15 V (+18 dBu) over-voltage protected
rms
110 ohms balanced, receive and transmit termination
Multi-channel DSP, programmable via network
Sub output: up to 48 dB/oct LPF, 8 PEQ/shelving filters
Satellite output: up to 48 dB/oct HPF, PEQ/shelving filters
Up to 1 sec of delay
Preset selection via rear panel switch
2 x IP68 rated 8-way, quick-release type
U-NET
2-channel switch-mode, class D
2400 W total
1400 W PSX Subwoofer
1000 W full-range satellite system (8 ohms)
1 x NL4 output to satellite system
85%
Internal fan
Temperature controlled external fan
45°C (113°F) for full output
25