Table of Contents
Advertisement
■ Scanning preparation
The transceiver scans all Tag channels when a scan other than the Dynamic Group Scan
is activated. In the Dynamic Group Scan, the transceiver scans only Tag channels in the
zone that you select. (p. 4)
When the transceiver finds a busy channel, it can be set to pause or to resume after a
pause. (Except for the Dynamic Group Scan and Repeater Scan).
L See pages 12 and 27 for the details on the Scan Resume function.
D Selecting the scan mode
1.
Open the "Scan Mode" screen.
[MENU] > Scan > Scan Mode
2.
Push [▲] or [▼] to select a scan mode, and then push
[ENT] to set it.
• "
(Open Scan)," "
Scan)," "
(Dynamic Group Scan)," or "
Scan)" is displayed on the operating screen.
L Push [CLEAR] to return to the previous screen.
D Setting a Tag channel
Tag channels are independently set for Open, Group, Priority, and Dynamic Group scans.
All channels may be preset as Tag channels for scans other than the Dynamic Group
Scan. For the Dynamic Group Scan, CB channels 9 to 20 in the Zone 1 are preset as Tag
channels by default.
L Before setting the Tag channels, you must select a scan mode.
1.
Open the "Tag" screen.
[MENU] > Scan > Tag
2.
Push [▲] or [▼] to select a channel.
3.
Select "On" or "Off" to set it as a Tag channel, and then
push [ENT] to set it.
• "
" is displayed on the operating screen.
L Push [CLEAR] to return to the previous screen.
(Group Scan)," "
(Priority
(Repeater
SCAN
Select a scan mode
When Open Scan is selected.
Example:
When CB channel 1 is set as
a tag channel for Open Scan.
4
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
11
Advertisement
Table of Contents
