Projector Body - Panasonic PT-RZ21К Operating Instructions Manual

Projector body

Front
1 2 3 4 5
6 7
Rear
Bottom
Projection direction
1 Remote control signal receiver (front)
2 Power indicator <ON (G)/STANDBY (R)>
Indicates the status of the power.
Attention
f Do not block the ventilation ports (intake and exhaust) of the projector.
30 - ENGLISH
Chapter 1 Preparation — About your projector
6
8
9
16
Side
7
7
10
3 Light source indicator <LIGHT1>
Indicates the status of light source 1.
4 Light source indicator <LIGHT2>
Indicates the status of light source 2.
5 Temperature indicator <TEMP>
Indicates the internal temperature status.
6 Adjustable feet
Adjusts the projection angle.
7 Air intake port
8 Remote control signal receiver (rear)
9 Air exhaust port
10 Control panel (x page 31)
11 Connecting terminals (x page 32)
12 Security slot
This security slot is compatible with the Kensington security
cables.
13 Power cord holder
(Except for PT-RZ21KD)
14 <AC IN> terminal
Connect the supplied power cord.
15 <MAIN POWER> switch
Turns on/off the main power.
16 Security bar
A wire, etc., can be attached to prevent theft.
7
11 12
13 14 15