[Frame Response]; [Frame Delay] - Panasonic PT-RZ21К Operating Instructions Manual

2) Press qw to select [ON] or [USER].
3) Press the <ENTER> button.
f The [EDGE BLENDING] screen is displayed.
4) Press as to select [BLACK LEVEL ADJUST].
5) Press the <ENTER> button.
f The [BLACK LEVEL ADJUST] screen is displayed.
6) Press as to select [UPPER FREE SHAPE], [LOWER FREE SHAPE], [LEFT FREE SHAPE], or [RIGHT
FREE SHAPE] to initialize.
7) Press the <ENTER> button.
f The [UPPER FREE SHAPE] screen, the [LOWER FREE SHAPE] screen, the [LEFT FREE SHAPE]
screen, or the [RIGHT FREE SHAPE] screen is displayed.
8) Press as to select [INITIALIZE].
9) Press the <ENTER> button.
f The confirmation screen is displayed.
10) Press qw to select [EXECUTE], and press the <ENTER> button.
Note
f The adjustment data for [UPPER FREE SHAPE], [LOWER FREE SHAPE], [LEFT FREE SHAPE], and [RIGHT FREE SHAPE] cannot be
initialized at once.
f To initialize all the adjustment data, select each item and execute [INITIALIZE] individually.
f When the projector is initialized by the following method, all data in [UPPER FREE SHAPE], [LOWER FREE SHAPE], [LEFT FREE
SHAPE], and [RIGHT FREE SHAPE] are initialized.
g When initialized by selecting the [PROJECTOR SETUP] menu → [INITIALIZE] → [ALL USER DATA]

[FRAME RESPONSE]

Set the processing method of the image frame delay.
1) Press as to select [FRAME RESPONSE].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[NORMAL]
[FAST]
*1
[FIXED]
*2
*1 When input signals are other than interlaced signals, [FAST] cannot be set.
*2 Only when moving image signals and still image signals with the vertical scanning frequency of 50 Hz or 60 Hz are input
Note
f [DIGITAL CINEMA REALITY] cannot be set when [FRAME RESPONSE] is set to [FAST].
f [FRAME RESPONSE] cannot be set during P IN P.

[FRAME DELAY]

Set the additional delay time against the frame delay status by the [FRAME RESPONSE] setting.
1) Press as to select [FRAME DELAY].
2) Press the <ENTER> button.
f The [FRAME DELAY] screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[+0.00ms] - [+100.00ms]
f The delay time (approximate) from the point the video signal is input until the image is projected is
displayed in [ACTUAL DELAY] of the [FRAME DELAY] screen.
Chapter 4 Settings — [ADVANCED MENU] menu
Standard setting.
Simplifies the image processing to reduce image frame delay.
Sets image frame delay to be constant regardless of the image position or magnification.
Sets the delay in 0.01 ms increments.
ENGLISH - 113