Features Menu - Sony KDF-50E2000 Operating Instructions Manual

Features menu

Features
Screen
AV2 Output
RGB Center
PC Adjustment
Timer
Back: Select:
Screen
AV2 Output
RGB Center
PC Adjustment
TV
0
Exit:
Enter:
MENU
Changes the screen format.
• "Auto Format": Automatically changes the screen format according to the
broadcast signal.
• "Screen Format": For details about the screen format, see page 14
• "Vertical Size": Adjusts the vertical size of the picture when the screen format is
set to Smart.
Tips
• Even if you have selected "On" or "Off" in "Auto Format", you can always modify the
format of the screen by pressing
• "Auto Format" is available for PAL and SECAM signals only.
Sets a signal to be output through the socket labelled
TV. If you connect a VCR to the
equipment connected to other sockets of the TV.
• "TV": Outputs a broadcast.
• "Auto": Outputs whatever is being viewed on the screen.
Adjusts the horizontal picture position so that the picture is in the middle of the
screen.
Tip
This option is only available if an RGB source has been connected to the Scarts connectors
1/ 1 2/
or
Customizes the TV screen as a PC monitor.
Tip
This option is only available if you are in PC Mode.
• "Phase": Adjust the screen when a part of a displayed text or image is not clear.
• "Pitch": Enlarges or shrinkes the screen size horizontally.
• "H Center": Moves the screen to the left or to the right.
• "V Lines": Corrects the picture lines while viewing an RGB input signal from the
PC connector.
• "Power saving": Turns to standby mode if no PC signal is received.
• "Reset": Resets to the factory settings.
You can select the options listed below on the
Features menu. To select options in "Settings",
see "Navigating through menus" (page 19).
repeatedly.
/ 2 socket, you can then record from the
2
on the rear of the TV.
/ 2 on the rear of the
Continued
23
GB