Synology FlashStation FS3017 Hardware Installation Manual
  1. Manuals
  2. Brands
  3. Synology Manuals
  4. Storage
  5. FlashStation FS3017
  6. Hardware installation manual

Synology FlashStation FS3017 Hardware Installation Manual

Hide thumbs Also See for FlashStation FS3017:
Table of Contents

Advertisement

Quick Links

Download this manual
Synology FlashStation FS3017
Hardware Installation Guide

Advertisement

Table of Contents
loading

Related Manuals for Synology FlashStation FS3017

Summary of Contents for Synology FlashStation FS3017

  • Page 1 Synology FlashStation FS3017 Hardware Installation Guide...

  • Page 2: Table Of Contents

    Table of Contents Chapter 1: Before You Start Package Contents Synology FlashStation at a Glance Safety Instructions Chapter 2: Hardware Setup Tools and Parts for Drive Installation Install Drives Add a RAM Module on FlashStation Attach PCIe Add-on Cards to the FlashStation...

  • Page 3: Chapter 1: Before You Start

    Chapter Before You Start Thank you for purchasing this Synology product! Before setting up your new FlashStation, please check the package contents to verify that you have received the items below. Also, make sure to read the safety instructions carefully to avoid harming yourself or damaging your FlashStation.

  • Page 4: Synology Flashstation At A Glance

    Synology FlashStation at a Glance Article Name Location Description 1. Press to power on the FlashStation. Power Button and 2. To power off the FlashStation, press and hold until you hear a beep Indicator sound and the Power LED starts blinking.

  • Page 5: Safety Instructions

    Safety Instructions Keep away from direct sunlight and away from chemicals. Make sure the environment does not experience abrupt changes in temperature or humidity. Place the product right side up at all times. Do not place near any liquids. Before cleaning, unplug the power cord. Wipe with damp paper towels. Do not use chemical or aerosol cleaners.

  • Page 6: Chapter 2: Hardware Setup

    Chapter Hardware Setup Tools and Parts for Drive Installation • A screwdriver www.synology.com • At least one 2.5” SSD (SAS/SATA) or HDD (SAS only) (please visit for compatible drive models.) Warning: If you install a drive that contains data, the system will format the drive and erase all existing data. Please back up any important data before installation.
  • Page 7 4 Push the handle inward to secure the drive tray. 5 Push the switch on the drive tray handle to the bottom to lock the drive tray. 6 Repeat the steps above to assemble the other drives you have prepared. 7 Drives are numbered as shown below.

  • Page 8: Add A Ram Module On Flashstation

    Add a RAM Module on FlashStation The optional Synology RAM module is designed for FlashStation memory expansion. Follow the steps below to install, check, or remove a RAM module on your FlashStation. To install the RAM module: 1 Shut down your FlashStation. Disconnect all cables connected to your FlashStation to prevent any possible damage.
  • Page 9 4 Unplug the cables numbered 5 and 6 to facilitate the removal of the ventilation duct cover. 5 Remove the 3 screws that secure the ventilation duct cover, pull up the ventilation duct cover, and put it aside. 9 Chapter 2: Hardware Setup...
  • Page 10 6 Insert the new memory module in the slot: a Push the retaining clips on the slot out to the sides. b Align the notch on the gold edge of the module with the notch in the memory slot. c Push down on the memory module with firm and even pressure. The retaining clips will snap into position as the module is correctly inserted.
  • Page 11 7 Put back the parts you removed in previous steps: a Put back the ventilation duct cover, and fasten the 3 screws you removed in step 5. b Connect the cables numbered 5 and 6 you unplugged in step 4. c Put back the beam, and fasten the 4 screws you removed in step 3.

  • Page 12: Attach Pcie Add-On Cards To The Flashstation

    FlashStation FS3017 requires the installation of one Synology FS3017 Expansion Card (optional) to connect up to two Synology Expansion Unit RX1217sas/RX2417sas (sold separately), and the expansion card must In this case, you can install one network interface card in the other slot.
  • Page 13 d Put back and fasten the screw that you removed in step 3-a so as to secure the newly inserted card. 4 Repeat step 3 to install the other add-on card for your FlashStation. 5 Put back the rear top cover by following step 8 of Add a RAM Module on FlashStation. 13 Chapter 2: Hardware Setup...

  • Page 14: Replace System Fan

    Replace System Fan If a system fan malfunctions, please see the instructions below to open the FlashStation and replace the malfunctioning fan. 1 Press the small buttons located on the sides of the FlashStation. 2 Lift to remove the fan cover. 3 Fans are numbered as indicated below: 14 Chapter 2: Hardware Setup...

  • Page 15: Replace Malfunctioning Psu

    4 Find the malfunctioning fan. Lift the fan upward to remove it. 5 Prepare a new fan, and slide it into the FlashStation. Make sure the fan is aligned properly as illustrated below. Replace Malfunctioning PSU If a PSU or its fan malfunctions, please see the instructions below to replace the malfunctioning PSU. 1 Unplug the power cord from the PSU to be replaced.

  • Page 16: Start Up Your Flashstation

    Start Up Your FlashStation 1 Connect one end of each power cord to the power ports located on the back of the FlashStation and the other end to a power outlet. 2 Connect at least one LAN cable to one of the LAN ports and the other end to your switch, router, or hub. 3 Press the power button to turn on the FlashStation.

  • Page 17: Chapter 3: Install Dsm On Flashstation

    Chapter Install DSM on FlashStation After hardware setup is finished, please install DiskStation Manager (DSM) – Synology’s browser-based operating system – on your FlashStation. Install DSM with Web Assistant Your FlashStation comes with a built-in tool called Web Assistant that helps you download the latest version of DSM from the Internet and install it on your FlashStation.
  • Page 18 Model specifications are subject to change without notice. Please refer to www.synology.com for the latest information. FlashStation FS3017 supports only one optional Synology FS3017 Expansion Card, which must be installed in the PCIe x16 slot. exFAT Access is purchased separately in Package Center.
  • Page 19 Please try to restart your FlashStation or re-insert the drive(s), and then run the HDD/SSD manufacturer's diagnostic tool to check the health status of the drive(s). If you can log into DSM, please run the built-in S.M.A.R.T. test to scan the drive(s). If the problem remains unresolved, please contact Synology...
  • Page 20 IMPORTANT–READ CAREFULLY: THIS END USER LICENSE AGREEMENT ("EULA") IS A LEGAL AGREEMENT BETWEEN YOU (EITHER AN INDIVIDUAL OR A LEGAL ENTITY) AND SYNOLOGY, INC. ("SYNOLOGY") FOR THE SYNOLOGY SOFTWARE INSTALLED ONTO THE SYNOLOGY PRODUCT PUCHASED BY YOU (THE “PRODUCT”), OR LEGALLY DOWNLOADED FROM WWW.SYNOLOGY.COM, OR ANY OTHER CHANNEL PROVIDED BY SYNOLOGY...
  • Page 21 Section 15. Termination. Without prejudice to any other or other legal action or proceeding to enforce rights or rights, Synology may terminate this EULA if you do not abide remedies under this EULA, the prevailing party will be by the terms and conditions contained herein. In such event,...
  • Page 22 SYNOLOGY, INC. LIMITED PRODUCT WARRANTY THIS LIMITED WARRANTY ("WARRANTY") APPLIES TO THE PRODUCTS (AS DEFINED BELOW) OF SYNOLOGY, INC. AND ITS AFFILIATES, INCLUDING SYNOLOGY AMERICA CORP, (COLLECTIVELY, "SYNOLOGY"). YOU ACCEPT AND AGREE TO BE BOUND BY THE TERMS OF THIS WARRANTY BY OPENING THE PACKAGE CONTAINING AND/OR USING THE PRODUCT.
  • Page 23 DAMAGES. the Product specifications; (b) has been repaired, modified or altered by anyone other than Synology or its agent or Limitation of Liability. SYNOLOGY'S AND ITS designee; (c) has been in any way misused, abused, or SUPPLIERS' LIABILITY ARISING OUT OF OR RELATING damaged;...
  • Page 24 Nothing in this Section shall be deemed to prohibit or restrict arbitration and will not be conducted on a class-wide or class Synology from seeking injunctive relief or seeking such other action basis. The arbitration shall be held in King County, rights and remedies as it may have at law or equity for any Washington, U.S.A.
  • Page 25 FCC Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Table of Contents