Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Synology DS509+
Summary of Contents for Synology DS509+
- Page 1 Disk Station DS509+ Quick Installation Guide...
-
Page 2: Safety Instructions
SAFETY INSTRUCTIONS Please read these safety instructions carefully before use, and keep this manual in a safe place for your future reference. Keep away from Do keep Synology Do not place the direct sunlight and product upright. Do Synology product... -
Page 3: Package Contents
PACKAGE CONTENTS Before you begin, please check the package contents to verify that you have received the items below. DS509+X 1 Installation CD X 1 2M RJ-45 LAN cable X 2 AC Power Cord X 1 Assembling Kit ... -
Page 4: Install Hard Disk
INSTALL HARD DISK Disk Station requires at least one 3.5” SATA hard drive for installation. Refer to the following steps for details: Warning! If you use a hard disk with data on it to install, system will format the hard disk and erase all data in some cases. - Page 5 Attach the SATA hard disk to the hard disk tray and use 4 screws to fix the hard disk. The disk position is numbered as shown below. Starting from the left: HDD1, HDD2, HDD3, HDD4, and HDD5, respectively. Insert the hard disk tray. ...
- Page 6 Reminder: Make sure the tray is completely attached to the system. Otherwise, the hard disk might not be able to function properly. Push the tray to fix the clip. Repeat the step above to assemble all hard disks you have prepared.
-
Page 7: Turn On Server
TURN ON SERVER 1. Connect the AC adapter to the power port. Then plug the power cord into a power socket. 2. Connect the RJ-45 cable to the server and connect the other end to your switch/hub/router or notebook/desktop/ PC. ... - Page 8 Press the power button on the front panel to turn on the server.
-
Page 9: Install System Software
Windows User Insert the installation CD to your computer. Choose Set up the Synology Server on the autorun menu. 3. Click Browse to select the “.pat” installation file in the installation 4. Follow the on-screen instructions to complete the setup process. - Page 10 2. Double click on the CD-Rom Drive thumbnail. 3. Double click MacOSX. 4. Double click Synology Assistant-SYNOLOGY.dmg.
- Page 11 5. Double click on the automatically generated thumbnail Synology Assistant-SYNOLOGY. dmg on the desktop. 6. Double click Synology Assistant to run the Setup Wizard. 7. Click Browse to select the “.pat” installation file in the installation 8. Follow the on-screen instructions to complete the setup process.
- Page 12 CONGRATULATIONS! Server has been set up. Refer to the User’s Guide in the installation CD for advanced settings and management. For more information or online resources, please visit http://www.synology.com. ...