Disc Operations - Panasonic SC-EN38 Operating Instructions Manual

Disc operations

Basic play
 Press [8, POWER] to turn the unit on.
 Press [;, OPEN/CLOSE] to open the CD lid and then set the CD in
place.
Press [;, OPEN/CLOSE] again to close the lid.
Keep fingers away from the CD lid when it is closing to avoid possible
minor injury.
Label must face outward.
Press until you hear it click into place.
 Press [CD q/h] to start play.
 Adjust the volume.
Note
• Be sure to press the [;, OPEN/CLOSE] button to open and close the
CD lid.
• Damage may occur if the lid is forced closed.
• During standby, if the CD is ready in the unit, the unit comes on and
play begins. (One touch play)
Stop Press [g].
Pause
Press [CD q/h]. Press again to resume play.
Skip/Search
Press [u, 2] or [i, 1] to skip.
Press and hold [u, 2] or [i, 1] to search.
Note
• You can search during play or while paused.
• You cannot search through MP3 files.
• You can only search within the current track during
program play, one track repeat, and random play.
Press [ or
Skip album
Press [ or
MP3
buttons in the stop mode.
CD
Direct access Press the numbered buttons to select the
play desired track.
MP3
(Play starts with
the track you
 Press [ or
select.)
 Press [i, 1] once and then press the numbered
buttons to select the desired track.
Repeat play
You can repeat program play or other selected play mode.
Press [REPEAT] before or during play.
"REPEAT ON" and " & " are displayed.
To cancel
Press [REPEAT] again.
"REPEAT OFF" is displayed and " & " is cleared.
Display function
This function allows you to display the information of the current track.
Press [DISPLAY] repeatedly during play or pause.
CD
Elapsed play time
MP3
Elapsed time Album name
ID3 (Artist) ID3 (Track)
Note
• Maximum number of displayable characters: approximately 30.
• This unit supports ver. 1.0 & 1.1 ID3 tags. Text data that is not
supported will not be displayed.
• ID3 is a tag embedded in MP3 tracks to provide information about the
track.
, ALBUM] in the play mode.
, ALBUM] once and then the numbered
, ALBUM ] to select the album.
Remaining play time
Track name
ID3 (Album)
➡ Page 3 for the buttons position of remote control and main unit.
Program play
The function allows you to program up to 24 tracks.
CD
 Press [PGM, -AUTO PRESET] while stopped.
 Press the numbered buttons to select tracks. (Maximum 24 tracks)
Repeat this step to program other tracks.
 Press [CD q/h] to start play.
Track number Program number
MP3
 Press [PGM, -AUTO PRESET] while stopped.
 Press [ or , ALBUM] to select your desired album.
 Press [i, 1] once and then press the numbered buttons to
select tracks. (Maximum 24 tracks)
 Press [ENTER].
Repeat step 2 to 4 to program other tracks.
 Press [CD q/h] to start play.
Album number Track number
g Confirm a Press [u, 2] or [i, 1] when "PGM" is
programmed
displayed in the stop mode. To check while
track programming, press [PGM, -AUTO PRESET]
twice after "PGM" appears, then press [u, 2]
or [i, 1].
Press [DEL] in the stop mode.
g Delete the last
track
Press [CLEAR] in the stop
g Delete all
mode.
programs
"CLR ALL" is displayed.
Press [PGM, -AUTO PRESET] in the stop
g Cancel program
mode to clear "PGM" indicator from the display.
mode
Note
Program contents are stored in the unit's memory even after changing to
a different function or turning the unit off. All program contents are erased
by pressing [CLEAR] or by opening the CD lid.
Play Mode function
Press [PLAY MODE] to select the desired mode.
Mode To play
1-TRACK one selected track on the disc.
1TR
Press the numbered buttons to select the track.
MP3
1-ALBUM one selected album on the disc.
1ALBUM
Press [ or
RANDOM a disc randomly.
RND
1-ALBUM all tracks in one selected album randomly.
MP3
Press [ or
RANDOM
1ALBUM RND
Note
During random play, you cannot skip to previous track.
PGM
, ALBUM] to select the album.
, ALBUM] to select the album.
5