Disc Operations - Panasonic SC-HC4 Operating Instructions Manual

Disc operations

Basic play
 Press [^] to turn the unit on.
 Press [CD ;, OPEN/CLOSE] to open the sliding door and then
set the CD in place.
• Tilt the CD to the left
and slide it in place.
 Press [CD ;, OPEN/CLOSE] again to close the sliding door.
Keep fingers away from the sliding door when it is closing to avoid
possible minor injuries.
 Press [CD q/h] or [OK] to start play.
 Press [VOL +, –] to adjust the volume.
Note
Be sure to press the [CD ;, OPEN/CLOSE] button to open and close
•
the sliding door. Damage may occur if the sliding door is forced closed.
• Be careful of CD hitting the sliding door while being removed.
To Action
stop Press [g].
pause
Press [CD q/h].
Press again to resume play.
skip/search
Press [u/t] or [y/i] to skip.
Press and hold [u/t] or [y/i] to search.
Note
• You can search during play or while paused.
• You cannot search through MP3 files.
• You can only search within the current track during
program play, one track repeat, and random play.
skip album
Press [e,r, ALBUM] in the play mode.
Press [e,r, ALBUM] once and then the numeric
MP3
buttons in the stop mode.
direct CD Press the numeric buttons to select the desired
access play track.
MP3
(Play starts
with the
 Press [e,r, ALBUM] to select the album.
track you
 Press [y/i] once and then press the numeric
select.)
buttons to select the desired track.
Display function
This function allows you to display the information of the current track.
Press [DISPLAY] repeatedly during play or pause.
Elapsed play time
CD
Elapsed play time
MP3
Press [MP3 INFO] repeatedly during play or pause.
ID3 (Album)
MP3
Note
• Maximum number of displayable characters: approximately 30.
• This unit supports ver. 1.0 & 1.1 ID3 tags. Text data that is not
supported will not be displayed.
• ID3 is a tag embedded in MP3 tracks to provide information about
8
the track.
8
Center part
• Label must face outward.
Press until you hear it
clicks into place.
Remaining play time
Album name Track name
ID3 (Track) ID3 (Artist)
Elapsed play time
Play Mode function
 Press [CD q/h].
 Press [PLAY MODE] to select the desired mode.
Mode
1-TRACK
1TR
1-ALBUM
1ALBUM
MP3
RANDOM
RND
1-ALBUM
RANDOM
1ALBUM RND
MP3
Note
• During random play, you cannot skip to previous track.
• The current play mode is cleared when you open the sliding door.
CD
• During RANDOM play, you can search backward or forward only
within the current track.
Program play
The function allows you to program up to 24 tracks.
CD
 Press [CD q/h] and then [g].
 Press [PROGRAM].
 Press the numeric buttons to select tracks.
Repeat this step to program other tracks.
 Press [CD q/h] or [OK] to start play.
MP3
 Press [CD q/h] and then [g].
 Press [PROGRAM].
 Press [e,r, ALBUM] to select your desired album.
 Press [y/i] once and then press the numeric buttons to
select tracks.
 Press [OK].
Repeat step 3 to 5 to program other tracks.
 Press [CD q/h] to start play.
To
cancel program
mode
MP3
INFO
replay the program
check program
contents
clear the last track
clear all
programmed tracks
Note
• When you try to program more than 24 tracks "PGM FULL" appears.
• The program memory is cleared when you open the sliding door.
CD
• During program play, you can search backward or forward only within
the current track.
To play
one selected track on the disc.
Press the numeric buttons to select the track.
one selected album on the disc.
Press [e,r, ALBUM] to select the album.
a disc randomly.
all tracks in one selected album randomly.
Press [e,r, ALBUM] to select the album.
Action
Press [PROGRAM] in the stop mode to clear
"PGM" indicator from the display.
Press [PROGRAM] then [CD q/h].
Press [u/t] or [y/i] when "PGM" is
displayed in the stop mode. To check while
programming, press [PROGRAM] twice after
"PGM" appears, then press [u/t] or
[y/i].
Press [DEL] in the stop mode.
Press [g] in the stop mode.
"CLR ALL" is displayed. Within 5 seconds,
press the button again to clear all tracks.