Radio Operations - Panasonic SC-EN38 Operating Instructions Manual

Disc operation (continued)
Note on CD-R and CD-RW
This unit can play CD-R and CD-RW recorded with CD-DA or MP3. Use an
audio recording disc for CD-DA and finalize* it when you finish recording.
The unit may not be able to play some discs due to the condition of the
recording.
* A process performed after recording that enables CD-R/CD-RW players to
play audio CD-R and CD-RW.
Caution
Choose discs with this mark:
Do not:
• use irregularly shaped CDs.
• attach extra labels and stickers.
• use CDs with labels and stickers that are coming
off or with adhesive exuding from under labels and
stickers.
• attach scratch-proof covers or any other kind of accessory.
• write anything on the CD.
• clean CDs with liquids (Wipe with a soft, dry cloth.).
Note about using a DualDiscs
• The digital audio content side of a DualDiscs does not meet the technical
specifications of the Compact Disc Digital Audio (CD-DA) format, so play
may not be possible.
• Do not use a DualDiscs in this unit as it may not be possible to insert it
correctly and it may get scratched or scraped.

Radio operations

Allocation settings
Each country allocates broadcast bands according to their particular
system.
You can change the FM steps. The step is factory-set to 0.2 MHz, but you
can change it to receive broadcasts allocated 0.1 MHz steps.
Any FM/AM frequencies preset in channels will be changed by this
procedure.
Preset them again.
 Select the FM band with [FM/AM/MUSIC P.] on the unit.
 Press and hold [FM/AM/MUSIC P.] on the unit.
After a few seconds the display changes to show the current minimum
frequency. Continue to hold the button down. The minimum frequency
changes and the step is changed.
To return to the original step, repeat the above steps.
Note
The preset memory will be initialized when you change your frequency
step.
To improve reception
FM
Receive the radio stations after
connecting the antenna. Then
attach the antenna cord to a
wall or pillar where there is good
reception.
To improve FM sound quality
Press and hold [PLAY MODE] to display "MONO".
To cancel
Press and hold [PLAY MODE] again until "MONO" disappears.
• "MONO" is also canceled if the frequency is changed.
• Turn off "MONO" for normal listening.
6
AM
Change the direction and location
of the antenna.
➡ Page 3 for the buttons position of remote control and main unit.
MP3
The unit can play MP3, a method of compressing audio without overly
hurting audio quality.
When creating MP3 files to play on this unit
• Maximum number of tracks and albums: 999 tracks and 256 albums.
• Compatible compression rate: Between 64 kbps and 320 kbps (stereo).
• Disc formats: ISO9660 level 1 and level 2 (except for extended formats).
• The time for reading TOC depends on the number of the tracks, the
folders or folder structures.
Limitations on MP3
• This unit is compatible with multi-session but if there are a lot of sessions
it takes more time for play to start. Keep the number of sessions to a
minimum to avoid this.
• This unit cannot play files recorded using packet write.
• If the disc includes both MP3 and normal audio data (CD-DA), the unit
plays the type recorded in the inner part of the disc.
If the disc includes both MP3 and other types of audio data (e.g. WMA or
WAV), the unit plays only the MP3.
• Depending on how you create MP3 files, they may not play in the order
you numbered them or may not play at all.
Manual tuning
 Press [FM/AM] to select "FM" or "AM".
 Press [PLAY MODE] to select "MANUAL".
 Press [u, 2] or [i, 1] to select the frequency of the required
station.
To tune automatically
 Press [FM/AM] to select "FM" or "AM".
 Press [PLAY MODE] to select "MANUAL".
 Press and hold [u, 2] or [i, 1] until the frequency starts
changing rapidly.
• Auto tuning stops when it finds a station.
To cancel auto tuning, press [u, 2] or [i, 1] once again.
•
Note
Auto tuning may not function when there is excessive interference.
Memory preset
You can preset up to 30 FM channels and up to 15 AM channels.
Preparation: Press [FM/AM] to select "FM" or "AM".
Automatic presetting
Press and hold [PGM, -AUTO PRESET] to start presetting.
Manual presetting
 Press [PLAY MODE] to select "MANUAL".
 Press [u, 2] or [i, 1] to tune to the required station.
 Press [PGM, -AUTO PRESET].
 Press the numbered buttons to select a channel.
The station occupying a channel is erased if another station is preset in
that channel.
 Repeat steps 2 to 4 to preset more stations.
Selecting a preset station
Press the numbered buttons to select the channel.
For channels 10 to 30 press [≧10], then the two digits.
OR
 Press [PLAY MODE] to select "PRESET".
 Press [u, 2] or [i, 1] to select the channel.
128 kbps (stereo) is recommended.