Advertisement
Tools Required:
n
Phillips head screwdriver
n
Tyrap (1)
Note: Follow anti-static procedures
2
Removing the Logic Board
Unplug all connectors from Main
logic (PCB) board.
Cut the tyrap holding the ribbon
cables.
Caution: Be careful not to nick
the ribbon cable when cutting the
tyrap. The ribbon cables are very
delicate.
Remove the three Phillips screws
holding the main logic board
Tyraps
14140 NE 200th St.
Woodinville, WA. 98072
(425) 398-8282
P/N: 108854 R0
Caution
When removing the
new logic board from
the packaging make
sure you are wearing
the static grounding strap
correctly. and have attached
it to a metal chassis ground.
If there is a static discharge
to the new board it may not
function properly. The strap is
included in the replacement
kit.
Advertisement
