Advertisement
Quick Links
Logic Board Replacement
For FJ8 apparel plotter
14140 NE 200th St.
Woodinville, WA. 98072
(425) 398-8282
P/N: 108854 R0
1
Remove the Bottom Cover
Power off and unplug the data
and power cables.
Unplug the take-up motor cable
from the bottom right side of
the machine.
Take-Up Motor Cable
Remove the 'Rear Stand Screws'
on the rear of the machine.
These hold the printer on the
stand (do not remove the front
screws).
Rear Screw (Right Side)
Rear Screw (Left Side)
Front Screw
(DO NOT REMOVE)
Make sure the stop screws are
installed on the take-up plate
on both sides of the machine.
Front Stop Screw
(DO NOT REMOVE)
Advertisement
Related Manuals for Ioline FJ8
Summary of Contents for Ioline FJ8
- Page 1 Logic Board Replacement For FJ8 apparel plotter 14140 NE 200th St. Woodinville, WA. 98072 (425) 398-8282 P/N: 108854 R0 Remove the Bottom Cover Power off and unplug the data and power cables. Unplug the take-up motor cable from the bottom right side of the machine.
- Page 2 14140 NE 200th St. Woodinville, WA. 98072 (425) 398-8282 From behind the machine push the head forward until it rests on the stop screw. Front Stop Screw Locate the screws on the bot- tom cover and remove only the bottom cover closest to the keypad of the machine.
-
Page 3: Tools Required
14140 NE 200th St. Woodinville, WA. 98072 (425) 398-8282 P/N: 108854 R0 Tools Required: Phillips head screwdriver Caution Tyrap (1) When removing the new logic board from Note: Follow anti-static procedures the packaging make sure you are wearing Removing the Logic Board the static grounding strap correctly. - Page 4 14140 NE 200th St. Woodinville, WA. 98072 (425) 398-8282 Carefully remove the logic board from the machine Installing the Logic Board Caution Install the new PCB. Make sure When removing the new logic board from you place the logic board behind the packaging make the rib in the body as shown.
- Page 5 Follow the procedure for ‘Motion Adjustment’ on Page 52 in the Ioline FJ Printer and StudioJet Ser- vice Manual. The Service manual is available from the Ioline FlexJet website. Contact Ioline Tech Sup- port for login information.