Adjusting Needle Drop Position - Bernina Deco 330 Operation, Service Manual & Parts List

Deco 330
The needle should be positioned in the center of needle plate hole.
1

Adjusting Needle Drop Position

2
3
4
1 Lower the Needle
the handwheel.
2 Remove the face cover and loosen Screw
move the Needle bar supporter
left until the needle
Needle plate hole
3 Tighten the Screw
4 Attach the face cover.
1 Screw
2 Needle bar supporter
3 Needle
4 Nedle plate hole
8
3 to its lowest position by turning
2 to the right or
3
comes to the center of the
.
4
1
.
,
1