Assembling The Pedestal - Panasonic Viera TC-50PS14 Operating Instructions Manual

■

Assembling the pedestal

Fix securely with assembly
screws . (Total 4 screws)
A
Tighten screws firmly.
Pole
R
(Image: TBLX0088)
Do not disassemble or modify the pedestal.
Warning
Otherwise the TV may fall over and become damaged, and
personal injury may result.
Caution Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal when it is physically damaged, personal injury may result. Contact your
nearest Panasonic Dealer immediately.
During set-up, make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal
will not be strong enough to support the TV, and it might fall over and become damaged, and
personal injury may result.
6
Attaching the pedestal to TV
■
Set-up
Carry out work on a horizontal
and level surface.
Tighten screws firmly.
A
B
Pole
L
Front
Base
Pole
Base
(Image: TC-42PS14)
AC cord connection
To attach
Insert it firmly until the
tabs on both sides click
into place.
Bottom view
Rear side
Arrow
mark
Hole for pedestal
installation
Pole
Fix securely with
assembly screws
B
(Total 4 screws)
Accessories
Assembly screws
(4 of each)
A B
(for 42"/50")
(for 42"/50")
M5 × 18 M5 × 25
(Silver) (Black)
(for 54") (for 54")
M5 × 25 M5 × 30
(Silver) (Black)
Poles (2)
or
L
L
printed at
R
the bottom
of the poles.
.
Base (1)
(for 42"/50")
(for 54")
To remove
Keep pushing both
side snaps and pull
down
is
R